The technical data given here are valid at room temperature (+23°C) maximum gain (0dB)
Software Version V4.000 dated 27.01.2009
| Method of the audio manipulation: |
fast convolution (FFT - multiplication - IFFT) |
| Operating modi: |
bypass, filter with or without room correction |
| Storage locations for room correction: |
4 |
| Frequency resolution: |
23.4375Hz |
| Length of the FFT-blocks: |
43msec |
| Absolut delay of the fast convolution: |
43msec |
| Selectable filter slops: |
1Oct. 1/2 Oct. 1/3 Oct. bis 1/12 Oct. |
| Selectable filter characteristic: |
low-pass, band-pass and high-pass |
| Number of filter channels: |
6 standard, 16 optional |
| Room correction adjustment range: |
-90.0dB to +12.0dB |
| Room correction adjustment resolution: |
0.1dB |
| Frequency range of the graphical display: |
10Hz bis 96kHz |
| Gain range of the graphical display: |
-36dB to +12dB (automatic adjustment for positive values) |
| Sampling frequency on the audio bus system: |
192kHz |
| Number of inputs from the audio bus system: |
2 from audio-bus 1 |
| Number of outputs to the audio bus system: |
16 to audio-bus 2 |
| Number of bits on the audio bus system: |
16x 24Bit |
| Number of digital audio inputs: |
1 S/PDIF Toslink |
| Number of digital audio outputs: |
1 S/PDIF Toslink |
| Sampling frequency of the digital audio input: |
32kHz to 192kHz step less, automatic |
| Sampling frequency of the digital audio output: |
TBD |
| Working frequency of the DSP (ADSP21367): |
333MHz |
| Word length / Accumulator of the DSP (ADSP21367): |
32Bit / 40Bit Float |
| Number of bits on the audio input and output: |
2x 24Bit, stereo |
State of information: 05. March 2009. Data given are subject of change without notice.
, print 
this page 
Wechseln nach Deutsch