The technical data given here are valid at room temperature (+25°C) and power supply of
nominal 230V (200V bis 264V, 50Hz +/-3%), other wise noted:
| Output voltage maximum (0dB): |
134Vss = 33.5dBV @ 3.9Ω resistive |
| Output voltage maximum (-1dB): |
116Vss = 32.3dBV @ 2.0Ω resistive |
| Output power sinus one block maximum (0dB): |
575W CW @ 3.9Ω resistive each channel |
| Output power sinus one block maximum (-1dB): |
840W CW @ 2.0Ω resistive each channel |
| Output power one block (0dB) pulse 1 period 30Hz sinus: |
1100W @ 2.0Ω resistive |
| Output power sinus total stereo (0dB): |
1150W CW @ 3.9Ω resistive each channel |
| Output power sinus total stereo (-1dB): |
1680W CW @ 2.0Ω resistive each channel |
| Output impedance DC - 100Hz: |
<0.71mΩ |
| Output impedance 100Hz - 1kHz: |
<1.1mΩ |
| Output impedance 1kHz - 10kHz: |
<7.1mΩ |
| Output impedance 10kHz - 20kHz: |
<14mΩ |
| Output impedance 20kHz - 50kHz: |
<18mΩ |
| Output impedance 50kHz - 100kHz: |
<36mΩ |
| Damping factor @ 20Hz and 100Hz: |
11220 = 81dB (8Ω test load) |
| Damping factor @ 1kHz: |
7080 = 77dB (8Ω test load) |
| Damping factor @ 10kHz: |
1120 = 61dB (8Ω test load) |
| Damping factor @ 20kHz: |
562 = 56dB (8Ω test load) |
| Damping factor @ 50kHz: |
447 = 53dB (8Ω test load) |
| Damping factor @ 100kHz: |
224 = 47dB (8Ω test load) |
| Intermodulation products @ 10kHz (-1dB): |
-100dBc |
| THD+N vs frequency DC-3kHz unweighted (-1dB): |
<-95dB |
| THD+N vs frequency 3kHz-20kHz unweighted (-1dB): |
<-90dB |
| Signal to noise unweighted (-1dB): |
<-97dB |
| Signal to noise A-weighted (-1dB): |
<-98dB |
| Suppression of mains hum @ (-10dB) (+23.5dBV = 2x 58W): |
-130dBc @ 50Hz; -130dBc @ 100Hz; -123dBc @ 150Hz; |
| Suppression of mains hum @ (0dB) (+33.5dBV = 2x 575W): |
-130dBc @ 50Hz; -130dBc @ 100Hz; -128dBc @ 150Hz; |
| Offset voltage at the output: |
+/- 200 mV max. |
| Sampling frequency at mono playback: |
768kHz |
| Sampling frequency at stereo playback: |
384kHz |
| Number of bits at mono input: |
1x 24Bit |
| Number of bits at stereo input: |
2x 24Bit |
| Working frequency of the PFC (ADSP21990): |
98.304MHz (2048x 48kHz) |
| Word length / Accumulator of the PFC (ADSP21990): |
16Bit / 48Bit |
| Working frequency of the DSP (ADSP21161): |
98.304MHz (2048x 48kHz) |
| Word length / Accumulator of the DSP (ADSP21161): |
32Bit / 64Bit |
| Working frequency of the D/A-Converter: |
24.576MHz (512x 48kHz) |
| Working frequency of the precision oscillator: |
24.576MHz (512x 48kHz) |
| Side band noise: |
TBD dBc/Hz @ 1kHz Offset and 24.576MHz |
| Number of D/A-Converters: |
8 pairs, (8x AD1853) |
| Coupling: |
DC; On: +5V to +7V; Off 0V |
| Input level at 50Ω: |
+4.2dBm to +9.2dBm |
| Digital data rate at the input / coupling: |
49.152MBd / AC |
| Max. attenuation of the connection cable: |
10dB @ 50MHz; 20dB @ 200MHz |
| Max. distance with RG223 (20dB @ 100m/200MHz): |
100m |
| Max. distance with RG58 (24dB @ 100m/200MHz): |
83m |
| Max. distance with RG316 (35dB @ 100m/200MHz): |
57m |
| Max. distance with RG174 (45dB @ 100m/200MHz): |
44m |
| Max. distance with RG178 (62dB @ 100m/200MHz): |
32m |
| Power supply voltage single phase, nominal: |
100V to 240V |
| Power supply voltage range operating: |
85V to 264V |
| Power consumption stand by: |
<8.0W, typ. 7.7W |
| Power consumption idle (<-5dB), 400mA idle currant: |
130W to 155W |
| Power consumption idle (<-5dB), 1000mA idle currant: |
230W to 255W |
| Power consumption idle (0dB), 400mA idle currant: |
210W to 235W |
| Power consumption idle (0dB), 1000mA idle currant: |
405W to 430W |
| Power consumption @ 1200W Output: |
ca. 1900W |
State of information: 05. February 2006. Data given are subject of change without notice.
, print 
this page 
Wechseln nach Deutsch